Ambient Weather Support

The sensor array may need to be reset, or the batteries may need replacing.

1. Cover the solar collector to shut of the solar energy source.
2. Cover remove the batteries.
3. Press the reset button for a full minute. There should be no LED flashing
4.  Reinsert the batteries
5. Uncover the solar collector.
6. LED should flash once per 14 seconds.
7. Power down and up the console to resync
8. If the outdoor temperature and humidity are still showing dashes (–) after several minutes, the sensor array must be replaced.
9. We have a one year warranty. To replace the sensor array, please visit:  www.AmbientWeather.com/rma.html