Ambient Weather Support

Here is how the sensors display on the console for the WS-3000×3, WS-3000×5 and WS-3000×8

WS-3000×3 showing sensors 1-3 With Bar Graph

WS-3000×5 showing sensors 1-5 With Bar Graph

WS-3000×5 showing additional sensors 6-8(optional) With Bar Graph 

The WS-3000×5 Will monitor up to 8 sensors. The WS-3000×5 Will display a bar graph with sensors 1-5 on the main screen then show any additional sensors(#6, #7 and #8) on the right section of the screen as shown in the image above.

WS-3000×5 Showing extreme temperature ranges:

WS-3000×8 showing sensors 1-8 No Bar Graph

You can convert the display from 8 sensors to 5 sensors (or visa versa) by downloading and installing the firmware for the WS-3000: https://www.ambientweather.com/ws3000.html

You can share the same field for sensors 5, 6, 7 and 8 and use the scroll mode to view each parameter. Please reference your User Manual for assigning more than one sensor to a field.

Manuals:
WS-3000-x3: https://p10.secure.hostingprod.com/@site.ambientweatherstore.com/ssl/Manuals/WS-3000.pdf
WS-3000-x5: https://p10.secure.hostingprod.com/@site.ambientweatherstore.com/ssl/Manuals/WS-3000.pdf
WS-3000-x8: https://p10.secure.hostingprod.com/@site.ambientweatherstore.com/ssl/Manuals/WS-3000-X8.pdf