Welcome. How can we help?

Help Center Search Results


Try searching by "Product ID", or by asking a general question.

What is the difference between absolute and relative pressure?

Absolute pressure is the measured atmospheric pressure. Absolute pressure is not corrected to sea-level conditions. To compare pressure conditions from one location to another, meteorologists correct pressure to sea-level conditions (referred to as relative pressure, or pressure relative to sea-level). Because the air pressure decreases as…


How to Refresh Your Browsers Cache Clearing Cache Memory To ensure you see the latest version of a site you need to clear the cache memory. This is done by doing a force refresh by pressing both control and F5 buttons simultaneously on your keyboard…

No Longer Updating AmbientWeather.net beginning September 5, 2018

On September 5, 2018, AmbientWeather.net moved the website to a different hosting service. This may cause updates to cease if the DNS is cached on your device, network (router) or the Internet. One symptom is the dashboard stops updating, but the graphs continue to update….

How do I read indoor conditions on Weather Underground?

Weather Underground only provides indoor data in their iPad application Wunderstation. However, AmbientWeather.net fully supports indoor and multiple channel sensors. Here is a complete list of weather stations that work with AmbientWeather.net: https://www.ambientweather.com/ambientnet.html  

Status LED is Blinking Rapidly.

If the Status/Reset light is flashing rapidly, it has not made a connection to the Internet. Make sure the WeatherBridge is plugged into your router and the router is connected to the Internet. If the problem persists, perform a factory reset: To restore the WeatherBridge…

How do I find my WeatherBridge on my Network?

To find your WeatherBridge on your local area network: Make sure the status/reset LED is solid and not blinking rapidly. This means it has made a connection to the Internet. With a web browser on the same network, go to: http://magicip.meteobridge.com/ Click on the IP…

How can I set up my Davis Instruments Console to rebroadcast to the WeatherBridgePro?

If you are not receiving the signal from the outdoor sensor suite, or the signal is weak, you can program the console to retransmit the data. The console acts as a repeater. Reference your Console User Manual: 6250: https://www.davisnet.com/product_documents/weather/manuals/07395-261_IM_06351.pdf 6152 Series: https://www.davisnet.com/product_documents/weather/manuals/07395-234_IM_06312.pdf Search for the term “retransmit”.

Reduced range for AirBridge and Davis Weather Stations.

You can configure the Davis Weather Station console to retransmit. Reference your weather station console manual and search for Restransmit in the Setup Mode. The AirBridge can then receive the data directly from the console instead of the Integrated Sensor Suite (ISS).

Rain Totals do not match, console, WeatherBridge and Internet.

Make sure the date, time and time zone match on the WeatherBridge and display console. If there are different, then the rain increments will be different. To set the Time Zone and Annual Rain starting month (default is January), click on the System tab. 3….