Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

How do I Access the Settings from my ObserverIP Module?

If you have not done so already, download IPTools to your PC or Mac: https://help.ambientweather.net/help/ambient-weather-observerip-download-center/ Launch IPTools, go the IP address of your module: Select Search and Open.

Weather Station Software at AmbientWeather.com

Virtual Weather Station (discontinued) Download Center WeatherSnoop for Mac Cumulus Weather Station Software EasyWeather Software for PC EasyWeather Software for Mac EasyWeatherIP Software for WS-1001-WiFi, WS-1002-WiFi Weather Station for PC and Mac WS-3000 EasyTemp for PC Ambient Weather VW-ANET AmbientWeather.net Website Access for Nano, WeatherBridge…

Cannot Connect to ObserverIP Module. IP address reads 192.168.0.99

If you cannot connect to the ObserverIP module, and the IP address in IPTools reads 192.168.0.99 all of the time, please perform a factory reset of the console. To restore the ObserverIP module to factory default, press the Reset pinhole button on the back of…

Sensor Array Loses Signal At Night, Observer Series.

Replace the batteries.We recommend Energizer Lithium Ultimate batteries like the following:https://www.amazon.com/Energizer-Ultimate-Lithium-Batteries-Each/dp/B00003IEMEhave a wide temperature operating range. They operate between -40 degF and 140 degF. Alkaline batteries only operate to about +10 degF. Rechargeable batteries often have a limited life and mean constant replacing, as well…

Does not update AmbientWeather.net. WeatherUnderground.com updates fine.

Power down and up the ObserverIP Module and wait a few minutes. If the problem persists: Reference the Weather Network panel on the ObserverIP module: Make certain you entered the correct MAC on the AmbientWeather.net Devices panel:https://ambientweather.net/devices You must be running Firmware Version 4.0 or…

How do I change the Time Zone on the ObserverIP Module?

If the time is incorrect on the ObserverIP Live Data panel, the Time Zone is set incorrecty. To change the Time Zone, from your OberverIP Module User Interface, change the Time Zone on the Station Settings page.   The following table provides times zones throughout…

ObserverIP Module Slows Down.

If the ObserverIP Module web interface slows down, power down and up the device by removing the AC power, wait about 5 seconds, and connect AC power. If you also own a WeatherBridge, or scrape the live data panel for another application, please read: ObserverIP…

ObserverIP does not power up.

If the ObserverIP Module does not power up (no lights): The issue may be with the AC adapter. Measure the output voltage of the AC adapter, and it should be about 5 Volts. If the AC adapter is not registering a voltage, we have a…

Is it possible for someone to hack my ObserverIP Module?

No, it is not possible to access the ObserverIP module outside of your local network. It reads and writes (https://) Port 80, and does not use Telnet (Port 23) for example. It is not possible to access the rest of your network(s) from the ObserverIP…

The console receives the data but the ObserverIP Module does not.

The console may be less subject to interference (RF or EMI) than the ObserverIP Module. Move the IP Module as far away from radiating sources, such as the router itself, other electronic equipment and it’s own AC adapter. Try reorienting the IP Module 90 degrees….

ObserverIP Module MAC address is 00:00:00:00:00:00

If the ObserverIP module MAC address reads 00:00:00:00:00:00, the ObserverIP module is defective and requires replacing. We have a one year warranty here: www.AmbientWeather.com/rma.html If out of warranty, the console is available here for purchase: https://www.ambientweather.com/amobserverip.html

ObserverIP module unable to connect to the internet

I am able to connect to the ObserverIP admin screen but not able to report to AmbientWeather.net or Weather Undergroud. Please check your routers outbound logs to make sure AmbientWeather.net http://107.170.198.71/ is not being blocked. Also check that you configure your network settings to use…

How Can I Compare Your Different Weather Station Model Features And Specifications?

Personal Weather Station Comparison Chart: https://ambientweather.com/weather-station-comparison-chart The following is a comparison of specifications and features for the Ambient Weather station brands. We offer seven different brands: Falcon SeriesWS-8480 Observer SeriesWS-1201-IP Osprey SeriesWS-2902CWS-1900AWS-1550-IP Osprey SeriesWS-2000WS-5000 WS-7000 SeriesWS-7078WS-7079 WS-100 Series:WS-100 ColorView Series:WS-50 Each brand shares the same…

PM25/PM2.5 Mounting Guidelines and Maintenance(ADVANCED)

The following is a guide on how to properly mount the PM2.5/PM25 sensor, and perform preventative maintenance: Mounting Guidelines:Place the sensor in a shaded, well ventilated, non-moisture condensing area. Although the sensor is designed for outdoor use, it is best to mount in a well…

Can the PM25/PM2.5 sensor measure pollen?

Can the PM25/PM2.5 sensor measure pollen? No. Pollen doesn’t have much effect on the AQI for particle pollution. Most pollen particles are much larger than the particles we measure for the AQI. The size of PM2.5 is 2.5 micrometers in diameter or smaller while pollen…

How do I update Observerip firmware using Linux

You must own a PC or Mac to update the firmware. Sorry, Linux products are currently not supported. Ambient Weather will update your ObserverIP at no cost (appropriate shipping charges will apply). Please fill out our Warranty Return form and mention you need the Observerip…