Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

Solar Radiation Definition

A solar radiation sensor measures solar energy from the sun. Solar radiation is radiant energy emitted by the sun from a nuclear fusion reaction that creates electromagnetic energy. The spectrum of solar radiation is close to that of a black body with a temperature of about 5800…

Ambient Weather ObserverIP Download Center

User Manual (required):Download the current User Manual for the IPObserver Module.ObserverIP User Manual IP Tools (required):The IP Scan Tool is required to find the IP address of the ObserverIP Module on your network, so you can program the IP Module with your web browser. It…

How do I Access the Settings from my ObserverIP Module?

If you have not done so already, download IPTools to your PC or Mac: https://help.ambientweather.net/help/ambient-weather-observerip-download-center/ Launch IPTools, go the IP address of your module: Select Search and Open.

How to report to Automatic Packet Reporting System (APRS) using Weatherbridge

How to report to Automatic Packet Reporting System (APRS) using Weatherbridge In the Weatherbridge Control Panel select the ‘Weather Network’ tab. Select APRS from the ‘Add more Weather Networks’ drop down list APRS Server: rotate.aprs2.net:14580 APRS ID is your Ham radio Call Sign APRS RegNum…

The indoor Thermometer-Hygrometer-Barometer Stopped Reporting.

If the indoor thermo-hygrometer-barometer (WH25B) stops reporting:   Replace the batteries in the sensor. The sensor has an LCD display. Make sure the display is updating properly. Place the sensor about 10 feet from the console or receiver, and power down and up the console…

How to obtain your CWOP ID using Weatherbridge

To obtain your CWOP ID using Weatherbridge: In the Weatherbridge Control Panel select the ‘Weather Network’ tab. Select CWOP from the ‘Add more Weather Networks’ drop down list In order to upload data, you need credentials from CWOP. Visit: http://www.findu.com/citizenweather/cw_form.html. Check your email for your…

Does not update AmbientWeather.net. WeatherUnderground.com updates fine.

Power down and up the ObserverIP Module and wait a few minutes. If the problem persists: Reference the Weather Network panel on the ObserverIP module: Make certain you entered the correct MAC on the AmbientWeather.net Devices panel:https://ambientweather.net/devices You must be running Firmware Version 4.0 or…

How Do I Calibrate Temperature (thermometer), ObserverIP Series?

To calibrate the temperature, select the Calibration panel from your IP Module: The following is an example of calibrating the temperature. Your results will vary. The actual temperature as measured by a red spirit thermometer is 70.0 degF. From the Live Data panel, your temperature…

How do I change the Time Zone on the ObserverIP Module?

If the time is incorrect on the ObserverIP Live Data panel, the Time Zone is set incorrecty. To change the Time Zone, from your OberverIP Module User Interface, change the Time Zone on the Station Settings page.   The following table provides times zones throughout…

ObserverIP Module Slows Down.

If the ObserverIP Module web interface slows down, power down and up the device by removing the AC power, wait about 5 seconds, and connect AC power. If you also own a WeatherBridge, or scrape the live data panel for another application, please read: ObserverIP…

Only Power Light is on, ObserverIP Series.

If only the power light comes on after the ObserverIP Module is reset or powered down and up again, the ObserverIP Module may be “bricked” and require reflashing of the firmware. Here is a guide: How do I update the Firmware for the ObserverIP Module?

Calibrate Relative Pressure, Observer Series.

Select the Calibration tab to view your calibration data from the weather station. The following is an example of calibrating the relative pressure. Your results will vary. The local relative pressure from TV, the newspaper or the internet for the official station in your area…

Is it possible for someone to hack my ObserverIP Module?

No, it is not possible to access the ObserverIP module outside of your local network. It reads and writes (https://) Port 80, and does not use Telnet (Port 23) for example. It is not possible to access the rest of your network(s) from the ObserverIP…

UV Sensor Spikes to 15, Observer Series.

If the UV sensor spikes to 15, the sensor array must be replaced. If under one year warranty, visit: www.ambientweather.com/rma.html If out of warranty, replace the sensor array here: https://www.ambientweather.com/amws1002array.html    

ObserverIP Module MAC address is 00:00:00:00:00:00

If the ObserverIP module MAC address reads 00:00:00:00:00:00, the ObserverIP module is defective and requires replacing. We have a one year warranty here: www.AmbientWeather.com/rma.html If out of warranty, the console is available here for purchase: https://www.ambientweather.com/amobserverip.html