Simply moving your display console (or receiver) to a different location may easily fix the communication issue. We recommend the following best practices for trouble free wireless communication. Fresh Batteries. If applicable, make sure there are fresh batteries in both the console and remote. Remember…
It may be as simple as placing the remote(s) (powered up with fresh batteries) about 10-20 feet away from the console, power down and up the console by removing one or more batteries, disconnecting from AC power (if applicable), wait 30 seconds, and put the…
Temperature reads too high (or inaccurate) when placed in the sun or close to a radiant heat source, like a house, building or structure. Place the sensor inside next to the indoor console sensor. Wait about 1 hour for stabilization. The sensors should agree within…
If the sensor(s) have stopped communicating to your console, it may be as simple as placing the remote(s) (powered up) about 10 feet away from the console, power down and up the console by removing one or more batteries, disconnecting from AC power (if applicable),…
Temperature can read too low (or inaccurate) at night when placed close to a radiant heat source, like a house, building or structure. It can also read lower then other stations in your area due to irrigation or sprinklers. Place the sensor inside next to…
None of the Ambient Weather Stations support repeaters or boosters at this point in time.
If the temperature or humidity does not match between what is displayed on the remote sensor and what is displayed on the console: If you own more than one remote sensor: The sensor has a channel number displayed on it, next to the temperature. Make…
Replace the batteries. We recommend the following batteries: https://help.ambientweather.net/help/my-rechargeable-batteries-no-longer-work-which-batteries-are-recommended-for-my-weather-station/ Clean any corrosion around and on the battery terminals. If the problem persists, the sensor array must be replaced. We have a one year warranty. To replace under warranty, please visit:www.AmbientWeather.com/rma.html If out of warranty, a…
To set the dip switches in an 8 channel sensor, there are three dip switches with 8 different combinations. DIP SWITCH FUNCTION 1 2 3 4 DOWN DOWN DOWN — Channel 1 UP DOWN DOWN — Channel 2 DOWN UP DOWN — Channel 3 UP…
The low voltage icon or indicator will be present on the console next to the sensor reading if the voltage falls below 2.4 Volts.
If the sensor displays “OF” and the console displays “LL”or “HH.H”, the senor must be replaced. We have a one year warranty. For details, please visit: www.AmbientWeather.com/rma.html Out of warranty replacements are available here: F007PF: https://www.ambientweather.com/amf007pf.html F007T: https://www.ambientweather.com/amf007t.html F007TH: https://www.ambientweather.com/amf007th.html F007TP: https://www.ambientweather.com/amf007tp.html
If you own more than one sensor, make sure the first sensor is on Channel 1 and the second sensor is on Channel 2. To set the dip switches, please reference: How do I Set the Channel Number Using the Dip Switches in the Sensor?…
If you are unable to open the pool float lid, please review the following Help Guide: If the problem persists, try using a wrench and vice grip or a leverage tool. We offer a maintenance kit: https://www.ambientweather.com/amf007pfmaiintenacekit.html which includes a wrench.
Floating Pool & Spa Thermometer loses reception Sensor placement is important, since the wireless signal cannot pass through Earth or ground. Tethering the sensor to the side of the pool that is line of sight to the sensor is recommended: Keep the console away from…
Make sure you are using high quality Lithium or Energizer batteries. Do not use rechargeable batteries. The solar panel does not recharge the batteries. If the problem persists, we have a one year warranty. To replace under warranty, please visit: www.AmbientWeather.com/rma.html If out of warranty, the…
