Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

REFRESH YOUR CACHE

How to Refresh Your Browsers Cache Clearing Cache Memory To ensure you see the latest version of a site you need to clear the cache memory. This is done by doing a force refresh by pressing both control and F5 buttons simultaneously on your keyboard…

Wireless signal is intermittent or not working

Simply moving your display console (or receiver) to a different location may easily fix the communication issue. We recommend the following best practices for trouble free wireless communication. Fresh Batteries. If applicable, make sure there are fresh batteries in both the console and remote. Remember…

Testing the accuracy of a hygrometer - saturated salt test

The saturated salt solution test is an easy method for testing the accuracy of your humidity sensor. Most electronic sensors are accurate from +/- 3 to 5% humidity, and some weather stations or weather centers can be calibrated from the display console by applying a…

Weather Station Temperature Reads Too High in the Day Time.

Temperature reads too high (or inaccurate) when placed in the sun or close to a radiant heat source, like a house, building or structure. Place the sensor inside next to the indoor console sensor. Wait about 1 hour for stabilization. The sensors should agree within…

How can I test the accuracy of my hygrometer (humidity Calibration)?

Place the sensor inside next to the indoor console sensor. Wait about 24 hours for stabilization. The sensors should agree within the accuracy specifications. Most digital capacitive hygrometer sensors are accurate within +/- 5%. Thus, the sensors should agree within 10% when considering full tolerance…

Temperature Reads too low at night.

Temperature can read too low (or inaccurate) at night when placed close to a radiant heat source, like a house, building or structure.  It can also read lower then other stations in your area due to irrigation or sprinklers. Place the sensor inside next to…

Data is not written to the SD Card.

If data is not being written to your Micro SD Card: Make sure the Micro SD Card is blank. We recommend an SD Card memory size of 32 GBytes or less. If the card is larger than 32 GBytes, it must be partitioned. Make sure…

Weather Station Software at AmbientWeather.com

Virtual Weather Station (discontinued) Download Center WeatherSnoop for Mac Cumulus Weather Station Software EasyWeather Software for PC EasyWeather Software for Mac EasyWeatherIP Software for WS-1001-WiFi, WS-1002-WiFi Weather Station for PC and Mac WS-3000 EasyTemp for PC Ambient Weather VW-ANET AmbientWeather.net Website Access for Nano, WeatherBridge…

Ambient Weather WS-3000 Download Center

User Manual (required):Download the current User Manual for the IPObserver Module. WS-3000 User Manual Software (optional):The WS-3000 Software allows you to program the console, set alarms and download archived data from SD Card. 1. Download the software from the link below.2. Run the installer.3. Connect…

Timezones/Time Zones

What is the correct Timezone/Time Zone setting for my location: Here is a list of Time Zones: Hours from GMT Time Zone Cities -12 IDLW: International Date Line West — -11 NT: Nome Nome, AK -10 AHST: Alaska-Hawaii Standard CAT: Central Alaska HST: Hawaii Standard…

How do I Display Channels 6-8 on the WS-3000-X5?

To display additional sensors 6-8, you will need to set up the sensors to scroll within the same display area. In the Normal mode, press the MENU key once to enter Setup Mode. In the example below, we will have display area scroll Channels 5-8….

My screen will not power up, WS-3000-X3, WS-3000-X5

If your screen does not power up, the issue may be with the AC adapter. Measure the output voltage of the AC adapter, and it should be about 5 Volts. If the AC adapter is not registering a voltage, we have a one year warranty…

Console no longer powers up, WS-3000 Series.

If the console no longer powers up, it will need replacing. We have a one year warranty. For warranty replacements, please visit: www.AmbientWeather.com/rma.html Otherwise, replacement consoles are available here: https://www.ambientweather.com/amws3000c.html

Firmware is not updating when the SD Card is Inserted

If firmware update file is not being read from your Micro SD Card: The Firmware.bin file must be the only file on the SD Card and not contained in a folder. Also, if you own a Mac, it may add a file extension to the…

WS-3000: WS-3000 x3, x5, x8 How sensors display on the console

Here is how the sensors display on the console for the WS-3000×3, WS-3000×5 and WS-3000×8 WS-3000×3 showing sensors 1-3 With Bar Graph WS-3000×5 showing sensors 1-5 With Bar Graph WS-3000×5 showing additional sensors 6-8(optional) With Bar Graph The WS-3000×5 Will monitor up to 8 sensors….

WS-3000: Can I label each individual sensor?

Q: Can I have a label name for each of my sensors? A: Yes you can with Firmware version 1.2.6. Please follow the steps below to install the version 1.2.6 firmware WS-3000-X3, WS-3000-X5, WS-3000-X8: Version 1.2.6 Instructions: Download the firmware file above. Extract the file…

Can I Change the Archive Interval, WS-3000 Series

You cannot change the archive interval from the console, but you can change the archive interval from the PC software. You can download the software here: https://www.ambientweather.com/ws3000.html Select Menu | Setup to set the time, date and display customization settings. From this screen you can…

How do I Export csv Data to my Computer?

To export a csv file to your computer, you must insert an SD Card into the memory card slot on the console. Backup data to micro SD / TF card. The SD card will record data into the HISTORY directory. The file is comma separated…