Welcome. How can we help?

Help Center Search Results

x

Try searching by "Product ID", or by asking a general question.

REFRESH YOUR CACHE

How to Refresh Your Browsers Cache Clearing Cache Memory To ensure you see the latest version of a site you need to clear the cache memory. This is done by doing a force refresh by pressing both control and F5 buttons simultaneously on your keyboard…

Wireless signal is intermittent or not working

Simply moving your display console (or receiver) to a different location may easily fix the communication issue. We recommend the following best practices for trouble free wireless communication. Fresh Batteries. If applicable, make sure there are fresh batteries in both the console and remote. Remember…

Perform a Network Reset

To Perform a Network Reset: Please follow the steps below to perform a Network Reset: Unplug power to modem, router and weather console (unplug AC adapter and/or remove batteries). Plug power back into the cable Modem and let it sync back up with the network….

Weather Station Temperature Reads Too High in the Day Time.

Temperature reads too high (or inaccurate) when placed in the sun or close to a radiant heat source, like a house, building or structure. Place the sensor inside next to the indoor console sensor. Wait about 1 hour for stabilization. The sensors should agree within…

Temperature Reads too low at night.

Temperature can read too low (or inaccurate) at night when placed close to a radiant heat source, like a house, building or structure.  It can also read lower then other stations in your area due to irrigation or sprinklers. Place the sensor inside next to…

How do I read indoor conditions on Weather Underground?

Weather Underground only provides indoor data in their iPad application Wunderstation. However, AmbientWeather.net fully supports indoor and multiple channel sensors. Here is a complete list of weather stations that work with AmbientWeather.net: https://www.ambientweather.com/ambientnet.html  

Outdoor Temperature not Updating on PWSWeather

If the outdoor temperature and humidity is not reporting on PWSWeather, but updating fine on AmbientWeather.net: Unfortunately there is no way to support this device because it is handled as an 8-channel sensor and not an outdoor sensor like with traditional stations. The issue is…

What is the Time Server For and Why is it Selectable?

The time server settings automatically sets the console time based on official time server sources over the Internet. The default is the time-a.nist.gov, which is the most reliable in the USA. Outside the USA, you may select a different time server if the console does…

WS-8482: How to reset the Console and Sensor

WS-8482: How to reset the Console and Sensor: To reset the TX-3110B Wireless Thermo-Hygrometer sensor please follow the steps below: 1.The WS-8482 supports seven wireless channels. If you have one sensor, leave the transmitter channel at Channel 1. If you have more than one sensor,…